Canon CLC 3220, Network Manual

Page: 96 / 228

Setting Up a Computer for Printing/Sending a Fax (Windows/UNIX) 3-46
3
Using a TC
P/IP Netw
or
k
NOTE
•
The admintool utility belongs to the operating system. For specific operating instructions, see the
operating system manual.
•
The above procedures are only examples. The setup procedures for your environment may differ.
•
You can specify a print queue. The following three print queues are available:
- LP
The machine prints according to its spool settings. Normally enter <LP> as a print queue.
- SPOOL
The machine prints only after spooling a print job on the hard disk regardless of its spool
settings.
- DIRECT
The machine prints without spooling a print job on the hard disk regardless of its spool settings.
•
When the job record appears on the touch panel display of this machine, <unknown> may be
displayed as Document Name and User Name of printing data transmitted to this machine over
UNIX network.
(To display the job record, press [System Monitor]
➞
[Print]
➞
[Log] on the touch panel display in
this order.)
The print settings are complete.
Printer Connection Method (IPP)
The following is the procedure for specifying the port setting.
Windows 98/Me/NT 4.0
NOTE
•
If you are using Windows 95/98/Me, you can also set IPP by installing the IPP Client software for
Windows 95/98/Me supplied by Microsoft.
•
In the following procedures, items displayed on the screen for Windows 98 are used; items might differ
depending on your operating system.