Canon CLC 3220, Network Manual

Page: 143 / 228

Setting Up a Computer as a File Server 4-21
4
Using a Net
W
a
re
Net
w
or
k
(W
indo
ws)
•
The machine's address settings:
IMPORTANT
•
If you use [Browse] to specify each item, press [Browse] after the expiration of the time specified
in "Startup Time Settings," on p. 3-30 (the default setting startup time is '60 seconds').
•
Up to 128 alphanumeric characters can be entered for both [Host Name] and [File Path] on the
control panel. Use strings no more than 128 characters long for the corresponding items on the
server.
•
If you change the language of the touch panel display, [Host Name] and [File Path] may not be
displayed correctly, or you may not be able to browse the directories.
•
In NDS mode, take notice of the following:
- For the host name, specify the context by which a user logs in.
- For the file path, specify the relative path from the user context. You may omit the "xx=" portion,
but the ".TREE=" portion with the tree name may not be omitted.
- Enter a user name prefixed with "CN=."
- Unless the same directory tree contains the user account name by which a user logs in and the
volume object to which data is sent, dots are required according to the layer of the relative path.
For example, one dot is required to indicate the layer one level above (Example 2), and two
dots are required to indicate the layer two levels above (Example 4).
NOTE
For instructions on how to specify recipient address settings, see Chapter 2, "Basic Sending
Methods," in the Sending Guide.
The settings for sending data to the file server are complete.
[Protocol]: NetWare (IPX)
[Host Name]: TOPMAX_SERVER
[File Path]: SYS\CFG
[User]: (User name entered in step 2)
[Password]: (Password for the above user)