Canon C200B, Instruction Manual

Page: 28 / 236

Preparing the Handle Unit and LCD Monitor
28
Preparing the Handle Unit and LCD Monitor
Attaching the HDU-2 Handle Unit
1 Attach the handle unit to the camera.
2 Use the hex wrench
1
(for 0.64 cm, 1/4" screws) and turn the lock
screw and hex socket head bolt
1
to secure the handle unit firmly.
1
Supplied with the HDU-2.
NOTES
• The handle unit has 0.64 cm (1/4") sockets, giving you the option to
attach a variety of commercially available accessories.
• The handle unit has two through-holes (
∅
8.8 mm (0.35 in.)) that are
35.5 mm (1.4 in.) apart center-to-center.
Attaching and Removing the LM-V1 LCD Monitor
By attaching the LA-V1 LCD Attachment Unit
1
to the LM-V1 LCD Monitor
1
, you can attach the LCD monitor to
the HDU-2 Handle Unit
1
or directly to the camera body itself. For details on adjusting the LCD monitor, refer to
Using the LCD Monitor
(
A
40) and
Adjusting the LCD Screen or Viewfinder
(
A
41).
1
Supplied accessory for the C200; optional accessory for the C200B.
Attaching the LCD Monitor
To attach the LCD monitor to the handle unit
1 Set the
Q
switch to OFF.
2 Rotate the LCD monitor mount 180° toward the LCD
attachment unit lock screw ( ) and attach the LCD
monitor ( ).
• Align the
Í
marks on the LCD monitor and LCD
monitor mount.
• Use the hex wrench
1
(for 0.64 cm, 1/4" screws) to secure it firmly with the LCD monitor fixation bolt on the
LCD monitor mount.
1
Supplied with the HDU-2.
• Based on your needs, you can mount the LCD monitor so that it faces toward or away from you.