Canon BJ-10sx User Manual Download

Page: 58 / 127

Chapter 6

Maintaining the Printer

Cautions

Cleaning the Printer

This chapter covers the care and maintenance of your printer. This
includes cautions, cleaning the printer, replacing the ink cartridge, and
storing the printer.

Follow these guidelines to avoid damage to your printer and harm to
you or others:

Set the printer on a stable surface before printing

Do not set anything on top of the printer.

Make sure the power is off any time you connect or disconnect
the AC adapter or interface cable.

Do not move the mechanism that holds the ink cartridge. You
may damage delicate mechanical parts.

Do not touch the print head area on the ink cartridge. You may
damage the print head.

To achieve the maximum performance from your printer, clean it
regularly.

Be very careful when cleaning the printer. Follow these steps:

1. Make sure the printer is turned off.
2. Unplug the AC adapter from the wall outlet.
3. Disconnect the AC adapter and the interface cable from the

printer.

Summary of Contents for BJ-10sx
































































































































Search results

Summary of Contents for BJ-10sx

Reviews:

Related manuals for BJ-10sx

Brands by name

Popular brands

Canon BJ-10sx, User Manual

Search results

Summary of Contents for BJ-10sx

Reviews:

Related manuals for BJ-10sx

Brands by name

Popular brands