Canon BJ-10sx, User Manual

Page: 40 / 127

BJ-10e Mode Font Styles
In BJ-10e mode, the following font styles are available:
z
Emphasized -- makes characters bold
z
Double high -- doubles the height of characters
z
Double wide -- doubles the width of characters
z
Slashed zero -- adds a slash to a numeric zero
Selecting a font style
To select a font style in BJ-10e mode, follow these steps:
1. Make sure the printer is on-line.
2. Simultaneously press the
ON LINE
and
PITCH
buttons.
The printer sounds a long varied tone and the
ON LINE
indicator light blinks.
3. Press the
PITCH
button as follows.
The printer sounds a low tone each time you press the PITCH
button, and it beeps twice after you press
PITCH
seven times.
NOTE: If you cannot remember the font style you have selected,
press the
PITCH
button until the printer beeps twice. Now you
can start over; press
PITCH
to select the desired font style.
Press Selects
once Emphasized
twice Double high
three times Double wide
four times Slashed zero
five times Unused
six times Return to default settings
seven times No change to current settings