Canon BJ-10sx, User Manual

Page: 124 / 127

Epson LQ Character Sets
Function ASCII Decimal Hexadecimal
Select character set
n Setting
0 Italics character set
1 Graphics character set
2 Remap download characters
from 0-127 to 128-255 ESC t n 27 116 n 1B 74 n
Set/cancel double-high mode
n Setting
0 Cancel double-high mode
1 Start double-high mode ESC w n 27 119 n 1B 77 n
Set/cancel high quality mode
n Setting
0 Cancel high quality mode
1 Start high quality mode ESC x n 27 120 n 1B 78 n
In Epson LQ mode, your printer can access the following character sets:
z
Epson Italics character sets
z
Epson Graphics character set
The Italics character set has control codes in two places: between
ASCII 0 and ASCII 32, and also between ASCII 128 and ASCII 159. In
addition, the Italics character set has the italics characters between
ASCII A0 and ASCII FF. All other characters are printable. The
characters from ASCII 80 to ASCII FF correspond to IBM Character
Set 2.
Use DIP switch 5 to select the Epson character set. Set DIP switch 5
ON to select the Graphics character set, or set it OFF to select the
Italics character set.