Canon B45 - Faxphone B45 Bubble Jet Fax Machine User Manual Download Page 100

Page: 100 / 124

9-8

Paper feeding problems ______________________

❏

Paper does not load.

The multi-purpose tray may contain too many sheets.
• Make sure the paper stack in the multi-purpose tray does not exceed the paper limit mark (

)

(see p. 1-7).

Paper may not be loaded correctly.
• Make sure the paper stack is loaded properly in the multi-purpose tray, and that the paper

guide is adjusted correctly (see p. 1-8).

❏

Paper is loaded skewed. (Printing is skewed.)

Paper may not be loaded correctly.
• Make sure the paper stack is loaded properly in the multi-purpose tray, and that the paper

guide is adjusted correctly (see p. 1-8).

• Make sure the right edge of the paper stack is aligned with the right side of the multi-purpose

tray and the paper guide is aligned with the left edge of the stack (see p. 1-8).

• Make sure the paper exit path is clear.

❏

Multiple sheets load into the fax at the same time.

Paper may not be loaded correctly.
• Make sure the paper stack is loaded properly in the multi-purpose tray, and that the paper

guide is adjusted correctly (see p. 1-8).

Sheets of paper may be sticking together.
• Be sure to fan the paper stack before loading it in the multi-purpose tray. This keeps the

sheets of paper from sticking together (see p. 1-8).

The multi-purpose tray may contain too many sheets.
• Make sure the paper stack in the multi-purpose tray does not exceed the paper limit mark (

)

(see p. 1-7).

• Do not exceed the maximum loading capacity of the multi-purpose tray (see p. 1-7).
• Do not force the paper stack into the multi-purpose tray.

Different types of paper may be loaded in the multi-purpose tray.
• Load only one type of paper.
• Make sure you load paper that meets the paper requirements for the fax (see Chapter 3).

❏

Repeated paper jams occur.

The paper you are using may be causing the jams.
• Be sure to fan the paper stack before loading it in the multi-purpose tray. This keeps the

sheets of paper from sticking together (see p. 1-8).

• Check that the paper you are using and your printing environment (see pp. 1-7, S-1) are

within the specifications of the fax (see Chapter 3).

• Try loading a fresh stack of paper in the multi-purpose tray.

Troubleshooting

Summary of Contents for B45 - Faxphone B45 Bubble Jet Fax Machine





























































































































Search results

Summary of Contents for B45 - Faxphone B45 Bubble Jet Fax Machine

Reviews:

Related manuals for B45 - Faxphone B45 Bubble Jet Fax Machine

Brands by name

Popular brands

Canon B45 - Faxphone B45 Bubble Jet Fax Machine, User Manual

Search results

Summary of Contents for B45 - Faxphone B45 Bubble Jet Fax Machine

Reviews:

Related manuals for B45 - Faxphone B45 Bubble Jet Fax Machine

Brands by name

Popular brands