manualshive.com logo in svg

Canon B45 - Faxphone B45 Bubble Jet Fax Machine, User Manual, Page: 96 / 124

Share
Download
Canon B45 - Faxphone B45 Bubble Jet Fax Machine User Manual Download Page 96

9-4

■

 Cleaning the scanner components

n

• If the scanner components are dirty, the documents you send or copy will also be dirty.
• Use a soft, lint-free cloth.

c

Do not use tissue paper, paper towels, or similar materials for cleaning.

4

When you are finished, close the printer cover.

Be sure to close the printer cover until it locks into place.

5

Reconnect the power cord.

1

Disconnect the power cord from the fax.

2

Open the printer cover.

3

While holding the scanning unit, flip down the scanning unit cover, marked with a white
strip inside, clean the components:

Wipe with a clean, soft, lint-free cloth moistened with water, then wipe with a clean, soft, dry, lint-
free cloth.

Scanning unit cover

Scanning unit

4

When you are finished, close the printer cover.

Be sure to close the printer cover until it locks into place.

5

Reconnect the power cord.

Summary of Contents for B45 - Faxphone B45 Bubble Jet Fax Machine





























































































































Reviews:

No comments