Canon 5119B001AA, Basic Operation Manual

Page: 70 / 188

3-10
Cop
ying
Copy a 2-sided card onto one side of paper.
OK Start
COPY
Keys to be used for this operation
1
Place a card on the platen glass and close the
feeder or the platen glass cover.
Place the card with spacing of 1/4” (5 mm) from the left edge of the
platen glass.
Align the center of the card with the arrow mark, as shown below.
To place the card
horizontally
To place the card
vertically
2
Press [ ].
3
Select <N on 1> using [ ] or [ ] and press [OK].
Copy: Press Start
100% LTR
Copy Ratio: 100% Di
...
Paper: LTR:Plain
N on 1: Off
1
1
1
4
Select <ID Card Copy> using [ ] or [ ] and press
[OK].
N on 1
Off
2 on 1
4 on 1
ID Card Copy
5
Press [ ] (Color) or [ ] (B & W).
Proceed to the next step when the scan is complete.
6
Turn sides.
Place the card with spacing of 1/4” (5 mm) from the left edge of the
platen glass.
Align the center of the card with the arrow mark, as shown below.
To place the card
horizontally
To place the card
vertically
7
Press [ ] (Color) or [ ] (B & W).
NOTE
To place your document (card) on the platen glass
Place the card on the left half of the platen glass.
Copy ratio
The copy ratio is automatically set to <100%>.
Supported paper sizes
Sizes larger than A4/Letter
Copying an ID Card