manualshive.com logo in svg

Canon 2909B002, User Manual

Share
Download
Canon 2909B002 User Manual Download Page 337

Advanced Guide

 > 

Troubleshooting

 > 

Print Results Not Satisfactory

 > Paper Is Smudged/Printed Surface Is Scratched

Paper Is Smudged/Printed Surface Is Scratched

Check 1: Did you confirm the paper and print quality settings?

Print Results Not Satisfactory

Check 2: Is the appropriate type of paper being used? Check the

following:

Check to see if the paper you are printing on is suitable for your printing purpose.

Loading Paper

When performing Borderless Printing, make sure that the paper you are using is suitable for

Borderless Printing.

If the paper you are using is not suitable for Borderless Printing, the print quality may be
reduced at the top and bottom edges of the paper.

Printing Area

Check 3: Load the paper after correcting its curl.

For Plain Paper

Turn the paper over and reload it to print on the other side.
Leaving the paper loaded on the Rear Tray for a long time may cause the paper to curl. In this
case, load the paper with the other side facing up. It may resolve the problem.
We recommend putting unused paper back into the package and keeping it on a level surface.

For Other Paper

1. With the printing side (A) facing up, cover the paper with a fresh sheet of plain paper to

avoid staining or scratching the surface.

2. Roll up the paper in the opposite direction to the paper curl as seen below.

3. Check to see that the paper curl is within approximately 0.08 to 0.2 inches /2 to 5 mm (B) in

height.

Стр

. 337 

из

 396 

стр

.

Paper Is Smudged/Printed Surface Is Scratched

Summary of Contents for 2909B002













































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands