manualshive.com logo in svg

Canon 2909B002, User Manual, Page: 344 / 396

Share
Download
Canon 2909B002 User Manual Download Page 344

Advanced Guide

 > 

Troubleshooting

 > Printing Does Not Start

Printing Does Not Start

Check 1: Make sure that the power plug is securely plugged in, then

turn the printer on.

While the 

Power

 lamp is flashing green, the printer is initializing. Wait until the 

Power

 lamp stops

flashing and remains lit green.

Note

When printing large data such as a photo or graphics, it may take longer to start printing. While
the 

Power

 lamp is flashing green, the computer is processing data and sending them to the

printer. Wait until printing starts.

Check 2: Check the status of ink tanks. Replace the ink tank if ink has

run out.

Check 3: Open the Top Cover and check to see if the ink lamps are

flashing red.

If there is still sufficient ink but its ink lamp is flashing red, an ink tank may not be installed in a right

position.

Routine Maintenance

Check 4: Open the Top Cover and make sure that the ink lamps light up

red.

If the ink lamp is not lit, press the 

 mark on the ink tank until it clicks into place.

Check 5: Make sure that the USB cable is securely plugged in to the

printer and the computer, then check the following:

If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to
the computer, and try printing again. If printing starts normally, there is a problem with the relay
device. Consult the reseller of the relay device for details.
There could also be a problem with the USB cable. Replace the USB cable and try printing

again.

Check 6: Restart your computer if you are printing from the computer.

If there are any unnecessary print jobs, delete them.

Deleting the Undesired Print Job

Check 7: Make sure that the Inner Cover is closed.

If the Inner Cover is opened, close the Inner Cover and press the 

RESUME/CANCEL

 button on the

printer.

Check 8: Make sure that your printer's name is selected in the Print

dialog box.

The printer will not print properly if you are using a driver for a different printer.
In Windows, make sure that your printer's name is selected in the Print dialog box.
On a Macintosh, make sure that your printer's name is selected in Printer in the Print dialog box.

Note

To make the printer the one selected by default, select Set as Default Printer (Windows),
Default Printer or Make Default (Macintosh).

Стр

. 344 

из

 396 

стр

.

Printing Does Not Start

Summary of Contents for 2909B002













































































































































































































































































































































































































Reviews:

No comments