manualshive.com logo in svg

Canon 2909B002, User Manual, Page: 364 / 396

Share
Download
Canon 2909B002 User Manual Download Page 364

Advanced Guide

 > 

Troubleshooting

 > Error Message Appears on a PictBridge Compliant Device

Error Message Appears on a PictBridge Compliant Device

The following are the possible errors that may occur when printing directly from a PictBridge compliant
device and the countermeasures to clear them.

Note

This section describes errors that are indicated on Canon-brand PictBridge compliant devices. The
error messages and operations may vary depending on the device you are using. For errors on non
-Canon PictBridge compliant devices, check the status of the 

Alarm

 lamp and take the

appropriate action to clear the error. For details, see 

Alarm Lamp Flashes Orange

.

For the errors indicated on the PictBridge compliant device and their solution, also refer to the
instruction manual of the device. For other troubles on the device, contact the manufacturer.

Error Message On PictBridge

Compliant Device

Action

"Printer in use"

If the printer is printing from the computer or warming up,
wait until the job ends.
When it is ready, the printer starts printing automatically.

"No paper"

Load paper, and select Continue* in the display on your
PictBridge compliant device.
* To resume printing, you can also press the 

RESUME/CANCEL

 button on the printer instead of selecting

Continue on the device.

"Paper Error"

If the Paper Output Tray is closed, open it. The printer
resumes printing. If the Inner Cover is opened, close it and
select Stop in the display on your PictBridge compliant
device to stop printing.

"Paper jam"

Select Stop in the display on your PictBridge compliant
device to stop printing.
Remove the jammed paper, load new paper, press the 

RESUME/CANCEL

 button on the printer, then try printing

again.

"Printer cover open"

Close the Top Cover on the printer.

"No print head"

The Print Head is defective or is not installed.
See 

Five flashes:

 in 

Alarm Lamp Flashes Orange

 and take

the appropriate action.

"Waste tank full"/"Ink absorber full"

The ink absorber is nearly full.
See 

Eight flashes:

 in 

Alarm Lamp Flashes Orange

 and take

the appropriate action.

"No ink"/
"Ink cassette error"

The ink tank is not installed properly or empty.
Check the number of how many the 

Alarm

 lamp flashes and

take the appropriate action to resolve the error.

Alarm Lamp Flashes Orange

"Ink Error"

An ink tank that was once empty is installed.
See 

Thirteen flashes:

 in 

Alarm Lamp Flashes Orange

 and

take the appropriate action.

"Hardware Error"

Ink tank errors have occurred.
Replace the ink tank.

Routine Maintenance

"Printer error"

An error requiring servicing may have occurred. (The 

Power

lamp flashes green and 

Alarm

 lamp flashes orange

alternately.)

Power Lamp Flashes Green and Alarm Lamp Flashes

Orange Alternately

Disconnect the USB cable between the printer and the

Стр

. 364 

из

 396 

стр

.

Error Message Appears on a PictBridge Compliant Device

Summary of Contents for 2909B002













































































































































































































































































































































































































Reviews:

No comments