Canon 2541C001 Operation Manual Download Page 60

Page: 60 / 243

amera Viewer

Using Drag to Move to Change the Camera Angle

The camera angle will move in the direction of the arrow.

The maximum length of the arrow is half the width and height of the video display area, and movement speed

increases with the length of the area.

Note

When using Drag to Move, the pan/tilt sliders will not move.

The camera will stop.



Using [Pan/Tilt/Zoom] in the [Camera Control] Menu

Open the

[Camera Operation] menu and perform camera pan, tilt, and zoom operations.

Click the [Switch Area Zoom/Drag to Move] button to enter

(Drag to Move) mode.

In the video display area, drag in the direction you would like to change the camera angle. An arrow will be
displayed.

Release the mouse button.

HM4x S30 S31

(2)

(1)

(3)

(4)

Summary of Contents for 2541C001




















































































































































































































































Search results

Summary of Contents for 2541C001

Reviews:

Related manuals for 2541C001

Brands by name

Popular brands

Canon 2541C001, Operation Manual

Search results

Summary of Contents for 2541C001

Reviews:

Related manuals for 2541C001

Brands by name

Popular brands