Canon 2234B014 - FAXPHONE L90 B/W Laser Reference Manual Download Page 98

Page: 98 / 193

Back

Next

Previous

TOP

7-4

Before Using the
Machine

Document and Paper

Sending and
Receiving

Copying

Printing

System Manager
Settings

Maintenance

Troubleshooting

Appendix

Index

Table of Contents

Use a clean, soft, dry, lint-free cloth to remove

any toner or paper debris from the machine’s
interior.

Do not touch the fixing assembly (A) as it becomes very hot
during use.
Do not touch the pins (B) or the transfer roller (C) as this can
damage the machine.

If loose toner comes into contact with your skin or clothing, wash
with cold water. Warm water will set the toner.

–

Hold the toner cartridge by its handle (A).

The arrow (A) on the toner cartridge should be

facing away from you and pointing down.

Summary of Contents for 2234B014 - FAXPHONE L90 B/W Laser


































































































































































































Search results

Summary of Contents for 2234B014 - FAXPHONE L90 B/W Laser

Reviews:

Related manuals for 2234B014 - FAXPHONE L90 B/W Laser

Brands by name

Popular brands

Canon 2234B014 - FAXPHONE L90 B/W Laser, Reference Manual

Search results

Summary of Contents for 2234B014 - FAXPHONE L90 B/W Laser

Reviews:

Related manuals for 2234B014 - FAXPHONE L90 B/W Laser

Brands by name

Popular brands