Canon 2234B014 - FAXPHONE L90 B/W Laser Reference Manual Download Page 41

Page: 41 / 193

Back

Next

Previous

TOP

2-6

Before Using the
Machine

Document and Paper

Sending and
Receiving

Copying

Printing

System Manager
Settings

Maintenance

Troubleshooting

Appendix

Index

Table of Contents

Make sure the paper is free from dust, lint, and oil stains.

Be sure to test paper before purchasing large quantities.

Store all paper wrapped and on a flat surface until ready for
use. Keep opened packs in their original packaging in a cool,
dry location.

Store paper at 64.4°F–75.2°F (18°C–24°C), 40%–60% relative
humidity.

Use only the transparencies designed for laser printers.
Canon recommends you to use Canon type transparencies
with this machine.

●

Summary of Contents for 2234B014 - FAXPHONE L90 B/W Laser


































































































































































































Search results

Summary of Contents for 2234B014 - FAXPHONE L90 B/W Laser

Reviews:

Related manuals for 2234B014 - FAXPHONE L90 B/W Laser

Brands by name

Popular brands

Canon 2234B014 - FAXPHONE L90 B/W Laser, Reference Manual

Search results

Summary of Contents for 2234B014 - FAXPHONE L90 B/W Laser

Reviews:

Related manuals for 2234B014 - FAXPHONE L90 B/W Laser

Brands by name

Popular brands