Canon 2234B014 - FAXPHONE L90 B/W Laser Reference Manual Download Page 101

Page: 101 / 193

Back

Next

Previous

TOP

7-7

Before Using the
Machine

Document and Paper

Sending and
Receiving

Copying

Printing

System Manager
Settings

Maintenance

Troubleshooting

Appendix

Index

Table of Contents

Lower the scanning platform (A) in the

document delivery slot.

Gently wipe the scanning glass (A) and white

sheet (B) with a clean, soft, lint-free cloth
moistened with water.

Do not dampen the cloth too much, as this may tear the document
or damage the machine.

After the scanning area becomes dry, lift the

scanning platform back into place.

Insert the paper stack cover.

Make sure the back end of the cover does not catch and lower the
scanning platform.

Reconnect the power cord.

Summary of Contents for 2234B014 - FAXPHONE L90 B/W Laser


































































































































































































Search results

Summary of Contents for 2234B014 - FAXPHONE L90 B/W Laser

Reviews:

Related manuals for 2234B014 - FAXPHONE L90 B/W Laser

Brands by name

Popular brands

Canon 2234B014 - FAXPHONE L90 B/W Laser, Reference Manual

Search results

Summary of Contents for 2234B014 - FAXPHONE L90 B/W Laser

Reviews:

Related manuals for 2234B014 - FAXPHONE L90 B/W Laser

Brands by name

Popular brands