Canon 2234B014 - FAXPHONE L90 B/W Laser Reference Manual Download Page 29

Page: 29 / 193

Back

Next

Previous

TOP

1-10

Before Using the
Machine

Document and Paper

Sending and
Receiving

Copying

Printing

System Manager
Settings

Maintenance

Troubleshooting

Appendix

Index

Table of Contents

Handset

The handset is used to use the machine as a telephone and a fax
machine, and to receive faxes manually.

For how to install the handset, see “Before FAX Setting,” in the Starter Guide.

Maintaining the Handset

Do not leave the handset exposed to direct sunlight.

Do not install the handset in hot or humid conditions.

Do not spray aerosol polish on the handset as it may cause
damage.

Use a damp cloth to wipe clean the handset.

■

–

Summary of Contents for 2234B014 - FAXPHONE L90 B/W Laser


































































































































































































Search results

Summary of Contents for 2234B014 - FAXPHONE L90 B/W Laser

Reviews:

Related manuals for 2234B014 - FAXPHONE L90 B/W Laser

Brands by name

Popular brands

Canon 2234B014 - FAXPHONE L90 B/W Laser, Reference Manual

Search results

Summary of Contents for 2234B014 - FAXPHONE L90 B/W Laser

Reviews:

Related manuals for 2234B014 - FAXPHONE L90 B/W Laser

Brands by name

Popular brands