Canon 2207C025 User Manual Download Page 294

Page: 294 / 331

Viewing User's Guide

2357-05X

This section describes the marks, buttons, screens, and other items used in the User's Guide. The warnings and

cautions are also given in the "Important Safety Instructions" in the "Getting Started" included with the machine. See

also these instructions.

Marks

Cautions regarding safety, restrictions and cautions regarding the handling of the machine, useful tips, and

other information are indicated using the marks below.

Indicates a warning concerning operations that may lead to death or injury to

persons if not performed correctly. To use the machine safely, always pay
attention to these warnings.

Indicates a caution concerning operations that may lead to injury to persons if

not performed correctly. To use the machine safely, always pay attention to
these cautions.

Indicates an operation that must not be performed. Read these items carefully,

and make sure not to perform the described operations.

Indicates operational requirements and restrictions. Be sure to read these

items carefully to operate the machine correctly, and avoid damage to the
machine or property.

Indicates a clarification of an operation, or contains additional explanations for

a procedure.

Indicates useful functions or tips for using the machine.

Keys and Buttons Used in this Manual

Keys on the operation panel and buttons on the computer display appear in the following notation:

Type

Example

Keys on the operation panel

Settings displayed on the operation panel

Buttons and other text interfaces displayed on the computer display [Preferences]

, and

on the operation panel are used to select the target item in settings, but their description is

omitted in the User's Guide. The operation for selecting <XXXXX> using

and pressing

represented as shown below in the User's Guide.

Select <XXXXX>.

Appendix

289

Summary of Contents for 2207C025












































































































































































































































































































































Search results

Summary of Contents for 2207C025

Reviews:

Brands by name

Popular brands

Canon 2207C025, User Manual

Search results

Summary of Contents for 2207C025

Reviews:

Brands by name

Popular brands