manualshive.com logo in svg

Canon 2207C025, User Manual

Share
Download
Canon 2207C025 User Manual Download Page 258

Cooling down... Wait a moment.

The temperature of the fixing assembly is high.

●

Wait for a while until the fixing assembly cools down. After the temperature of the fixing assembly falls,
the message will disappear.

Could not connect. (for Access Point Mode connection)

Connection in Access Point Mode failed due to an error.

●

Wait a few moments and try again. If you still cannot connect, turn OFF the machine, and then turn it back
on again.

Connecting Directly (Access Point Mode)(P. 112) 

Could not connect. (for Easy Connection via PC connection)

An error has occurred while starting Easy Connection via PC (cableless setup mode).

●

Press the Back key to return to the previous screen, and then try <Easy Connection via PC> again.

●

If the same message still appears after retrying <Easy Connection via PC>, turn OFF the machine, and then
turn it back on again.

Could not connect. Check the PSK settings.

The network key (PSK) of a wireless router to be connected is not set to the machine correctly.

●

Check the network key (PSK) of the wireless router, and set it to the machine again.

Checking the SSID and Network Key(P. 35) 
Setting Up Connection by Selecting a Wireless Router(P. 30) 
Setting Up Connection by Specifying Detailed Settings(P. 32) 

●

If  the  problem  persists  even  after  checking  the  network  key,  check  whether  the  machine  is  properly
installed and ready to connect to the network.

Installation/Settings Problems(P. 230) 

Could not connect using the wireless LAN. (for wireless LAN connection)

A connection failed due to an error while setting wireless LAN connection.

●

Restart the machine and set again.

●

If the problem persists even after restarting the machine, check whether the machine is properly installed
and ready to connect to the network.

Installation/Settings Problems(P. 230) 

●

If the problem persists even after checking the wireless LAN connection, check the security settings of the
wireless router.

Troubleshooting

253

Summary of Contents for 2207C025












































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands