Canon 2080B001 - XL H1S Camcorder Instruction Manual Download Page 31

Page: 31 / 163

rep
ara

tio

Loading/Removing a Cassette

Use only videocassettes marked with the

logo. For recording in HDV we recommend you use

videocassettes designed for HDV recording.

1. Slide the

EJECT switch to open the

cassette compartment cover.

The cassette compartment opens automatically.

2. Load/remove the cassette.

• Insert the cassette straight, fully into the

compartment with the window facing out.

• Remove the cassette by pulling it straight out.

3. Close the cassette compartment cover.

Press the

mark on the cassette compartment

cover.

Do not interfere with the cassette compartment while it is opening or closing automatically.

Be careful not to get your fingers caught in the cassette compartment.

If the camcorder is connected to a power source, cassettes can be loaded/removed even if the

dial is set to OFF.

Summary of Contents for 2080B001 - XL H1S Camcorder




































































































































































Search results

Summary of Contents for 2080B001 - XL H1S Camcorder

Reviews:

Related manuals for 2080B001 - XL H1S Camcorder

Brands by name

Popular brands

Canon 2080B001 - XL H1S Camcorder, Instruction Manual

Search results

Summary of Contents for 2080B001 - XL H1S Camcorder

Reviews:

Related manuals for 2080B001 - XL H1S Camcorder

Brands by name

Popular brands