Canon 2080B001 - XL H1S Camcorder Instruction Manual Download Page 154 | Manualshive

Page: 154 / 163

background image

154

Optional Accessories

Call or visit your local retailer/dealer for genuine Canon video accessories. You can also obtain genuine
accessories for your Canon camcorder by calling: 1-800-828-4040, Canon U.S.A. Information Center.

Battery Packs

The BP-950G is also available as an optional accessory.
The optional BP-970G provides over 35% more
recording time than the BP-950G.

Car Battery Adapter CB-920

Use the car battery adapter to power the camcorder or
charge battery packs on the move. The car battery
adapter plugs into your car’s cigarette lighter socket and
runs off a 12-24V DC negative ground battery.

FS-72U Filter Set

Ultraviolet, neutral density and circular polarizing filters
to help you take control of difficult lighting conditions.

HC-3200 System Case

A solid, lockable case that provides safe and stylish
protection for the camcorder during transportation and
storage.

16x Manual Zoom Lens XL 5.4-86.4 mm

A high-resolution zoom lens with two zoom modes
(manual and powered), built-in ND filter and AE
functions.

Extender XL 1.6x

Attach this extender between a Canon XL lens and the
camcorder to boost the focal length of the lens by 1.6x.

Use of genuine Canon accessories is recommended.

This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon
shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction
of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this
warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories, although
you may request such repairs on a chargeable basis.

BP-950G

BP-970G

CO

PY

«
...
152
153
154
155
156
...
»

Summary of Contents for 2080B001 - XL H1S Camcorder




































































































































































Reviews:

No comments

Related manuals for 2080B001 - XL H1S Camcorder

Brand: Ultracker Pages: 3

PerfectView CAM26W

Brand: Waeco Pages: 168

Brand: ElectrIQ Pages: 19

Brand: AIPTEK Pages: 373

Brand: BEAULIEU Pages: 74

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

AGLC35P - INDUSTRIAL CAMCORDER

Brand: Panasonic Pages: 6

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 12

AKMSU930 - MASTER SETUP UNIT

Brand: Panasonic Pages: 16

HDC SD9 - Camcorder - 560 KP

Brand: Panasonic Pages: 16

Brand: Panasonic Pages: 52

Brand: Panasonic Pages: 128

HDC SD9 - Camcorder - 560 KP

Brand: Panasonic Pages: 144

HDC SD5 - AVCHD 3CCD Flash Memory High Definition Camcorder

Brand: Panasonic Pages: 144

Brand: MAGINON Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands