© 2001 Cannondale Corporation - All Rights Reserved
42
X440s Owner's Manual.fm
5. Remove the fuel tank bolt and lift up the front of the
fuel tank. Slide the tank forward slightly, and remove
it from the vehicle.
6. To install the fuel tank, align the tank onto the frame.
NOTE : Make sure the fuel tank buffers (1) align with the
notches (a) on both sides of the fuel tank.
7. Tighten the bolt to the specified torque
TORQUE : Fuel, fuel tank mounting bolt
5.0 lbf•ft (6.8 N•m)
8. Press in the quick connect tabs on the fuel valves.
9. Apply a light coat of engine oil to the outlet O-rings.
Then, return the quick connects, and install them into
the fuel tank valves.
REPLACING THE FUEL FILTER
NOTE : Accumulation of dirt in the fuel filter will restrict fuel
flow. Proper fuel flow and pressure is critical to the reliability
of the fuel injection system and level of vehicle performance.
Therefore, the fuel filter should be inspected frequently and
replaced if necessary.
1.
Remove the tank outlet quick connect fitting. Press in
on the fitting tab before removing the fitting from the
tank valve.
2. Loosen the filter hose clamps and remove the filter.
3. Reinstall a new filter and make sure the hose clamps
are tightened securely. Be sure to observe any flow
indicator on the filter housing.
1.
Fuel tank bolt
1.
buffer
a. notch
1
a
1
1.
Outlet quick connect
2.
Fuel filter
2
FLOW
FL
OW
1
