Printed : 8/13/01
79
P/N 951-05002032
FRONT BRAKE LEVER LUBRICATION
1.
Place the vehicle on a stand.
2. Remove the rubber cover from the brake lever.
3. Remove the nut (1), pivot bolt (2), and brake lever (3).
4. Spray all the parts with a water-displacement
chemical, wipe them off, and dry them thoroughly.
5. Install the brake lever and apply a light coat of high
quality waterproof grease onto the pivot bolt.
NOTE : Only apply a light coat of grease so it does not
attract a lot of dirt and debris.
6. Install the pivot bolt and tighten the nut securely.
7. Install the rubber boot over the brake lever.
SHIFT LEVER LUBRICATION
1.
Remove the pinch bolt (1) and carefully slide the shift
lever (2) off the shift shaft (3).
CAUTION
Do not bend the shift shaft or damage the splines
when removing the shift lever.
2. Examine the cover shaft oil seal for leaks or other
damage. Contact an authorized Cannondale
Motorsports dealer for servicing if a leak is
discovered.
3. Apply a light coat of clean motor oil onto the splined
area of the shift shaft.
4. Install the shift lever pinch bolt and tighten to the
specified torque.
TORQUE : Engine, shift lever pinch bolt
5.0 lbf•ft (6.8 N•m)
5. Apply a light coat of clean engine oil to the folding tip
pivot.
1.
Nut
2.
Pivot bolt
3.
Brake lever
1
2
3
1.
Pinch bolt
2.
Shift lever
3.
Shift shaft
1
2
3
