Printed : 8/13/01
25
P/N 951-05002032
the case. Insert the filter into the bolt, and install into
the case.
9. Tighten the bolt to the specified torque.
TORQUE : Transmission, oil, drain bolt
6.0 lbf•ft (8.1 N•m)
10. Add the specified transmission oil at the filler cap until
oil level reaches the bottom of the check bolt hole.
Pour slowly and allow time for the oil to flow
throughout the case cavity.
11. Then, run the engine briefly (1-2 minutes) to circulate
newly added oil and recheck the level. Add if
necessary.
NOTE : The transmission oil level should always be at the
bottom of the check bolt hole.
1.
Drain bolt
2.
Sealing washer
3.
Filter (screen)
a. Sealing
washer
flat
side
2
1
3
a
