Printed : 8/13/01
57
P/N 951-05002032
CAUTION
Do not attempt to advance or retard the ignition tim-
ing by moving the crankshaft position sensor. The
fuel injection and ignition timing have been tuned to
produce maximum engine power at all speeds and
throttle positions. Deviation from factory ignition
timing can cause serious engine damage. The crank-
shaft position sensor monitors engine position at
BDC, not TDC. Therefore, ignition timing is based off
of BDC, not TDC.
Engine Control Module (ECM)
M1000
The ECM is located on the ECM mounting plate within the
subframe. ECM diagnostics are performed by using
specially developed Windows based software and a data
cable.
MC1000 DIAGNOSTICS
A software diagnostic program has been developed to
service this vehicle. It is a Windows based program that can
be used on a PC or Palm PC. A special data cable is used
to connect the vehicle to the PC or Palm PC.
Contact an authorized Cannondale motorsports dealer for
special tools developed to service your vehicle.
Components have been removed for this photo.
Components have been removed for this photo.
1.
Data port
2.
Data port
1
2
