Printed : 8/13/01
81
P/N 951-05002032
CLUTCH LUBRICATION
1.
Place the vehicle on a stand.
2. Remove the clutch cable from the clutch lever.
3. Remove the quick-adjuster (1) from the clutch lever.
4. Remove the nut (2), pivot bolt (3), clutch lever and two
washers.
5. Spray all the parts with a water-displacement
chemical, wipe them off, and dry them thoroughly.
6. Install the clutch lever and washers into the clutch
housing.
NOTE : Apply a light coat of high-quality grease to the
clutch lever pivot bolt. Only apply a light coat of grease so it
does not attract a lot of dirt and debris.
7. Install the clutch lever pivot bolt and nut - tighten
securely.
8. Lubricate the threads with clean engine oil and install
the quick-adjuster (1) and align the tab (a) with the
slot (b) in the clutch housing.
9. Lubricate the clutch cable as described in the next
procedure and install the clutch cable into the clutch
lever .
10. Adjust the clutch freeplay as specified.
1.
Quick adjuster
2.
Nut
3.
Pivot bolt
1.
Quick adjuster
a. Tab
b.
Slot
1
b
a
