Cannon imageRUNNER 5075, Support Manual

Page: 60 / 268

Main Power and Control Panel Power 1-20
1
Be
fo
re
Y
o
u
Star
t Usin
g
Th
is Mach
ine
❑
After the Start Up screen disappears, the MEAP Start Up screen is displayed
regardless of the Set as Initial Function settings.
IMPORTANT
•
If you turn OFF the main power, wait at least 10 seconds before turning the main
power back ON. For instructions on restarting (turning the main power switch OFF
and then ON) the machine, see "Main Power and Control Panel Power," on p. 1-16.
•
Do not turn the main power OFF, if you want to send or receive I-fax or fax
documents. Also, do not turn the main power OFF, if the optional Universal Send
Kit is activated, or the Super G3 FAX Board is installed, and you want to be able to
send or receive fax documents. Sending or receiving I-fax or fax documents cannot
be done when the main power is turned OFF.
•
If SSO or SDL is set as the login service, the machine will take longer to become
ready to scan.
4
If you are using a login service, log in using the procedure for
the login service you are using.
NOTE
•
If you are using Department ID Management with the optional Card Reader-C1,
see Chapter 3, "Optional Equipment," in the
Reference Guide .
•
If you are using Department ID Management, see Chapter 2, "Basic Operations," in
the
Reference Guide .
•
If you are using SDL or SSO, see Chapter 2, "Basic Operations," in the Reference
Guide .