Cannon imageRUNNER 5075, Support Manual

Page: 58 / 268

Main Power and Control Panel Power 1-18
1
Be
fo
re
Y
o
u
Star
t Usin
g
Th
is Mach
ine
NOTE
•
Once the message <Reservation copies can be made.> appears on the touch
panel display, you can specify settings, and copying or printing begins
automatically as soon as the machine finishes warming up. (See Chapter 1,
"Introduction to the Copying Functions," in the
Copying and Mail Box Guide .)
•
In the case above, the standard settings are selected.
•
The standard copy settings are:
- Copy Ratio: Direct (100%)
- Paper Selection: Auto Paper Selection
- Copy Exposure: Automatic Exposure Adjustment
- Copy Quantity: 1
- Copy Function: 1 1-sided copy
•
The standard settings for each function of the machine (Copy, Mail Box, Send, and
Fax) are already set at the factory, but you can change them to suit your needs.
(See Chapter 8, "Customizing Settings," in the
Copying and Mail Box Guide , and
Chapter 9, "Customizing Communications Settings," in the Sending and Facsimile
Guide .)
•
You can select which functions to display on the Basic Features screen when
turning ON the main power, according to the Additional Functions settings. (See
Chapter 4, "Customizing Settings," in the
Reference Guide .)
•
If you press [
➞
] on the Basic Features screen right after the machine is activated,
the screen will be blank. Wait for a moment, and then press [
➞
] again.
•
If a Macintosh, which has been shut down, is connected to the machine via a USB
cable, when you turn the machine ON, the Macintosh may also turn ON. In this
case, disconnect the Macintosh from the machine. (You may also be able to solve
this problem by using a USB hub between the machine and the Macintosh).
●
If login authentication by a login service (SDL or SSO) is not set, and
MEAP is selected as the initial function in Common Settings (from
the Additional Functions screen):
❑
The Start Up screen is displayed until the machine is ready to scan.