Cannon imageRUNNER 5075, Support Manual, Page: 56 / 268

Main Power and Control Panel Power 1-16
1
Be
fo
re
Y
o
u
Star
t Usin
g
Th
is Mach
ine
Main Power and Control Panel Power
The machine is provided with two power switches, a main power switch and a
control panel power switch, as well as a breaker that detects excess current or
leakage current.
How to Turn ON the Main Power
This section explains how to turn ON the main power.
1
Make sure that the power plug is firmly inserted into the
power outlet.
WARNING
Do not connect or disconnect the power cord with wet hands, as this may
result in electrical shock.
2
Press the main power switch to the "I" side. The main power
switch is located on the right side of the machine.
The main power indicator on the control panel lights when the main power switch
is turned ON.
IMPORTANT
If the main power indicator on the control panel does not light even though the main
power switch is ON, be sure to check the breaker to see if it is OFF. (See "When the
Power Does Not Turn ON," on p. 3-103.)
( I side)
( side)