Rev 1.0
25
•
AIN1
•
AIN2
•
AIN3
•
AIN4
•
AIN5
•
AIN6
•
displayVolt
•
displayTemp
•
PWMoutDuty (MFD28/32 Gen2 only)
•
GearCalc (MFD28/32 Gen2 only)
•
FreqIn1 (MFD28/32 Gen2 only)
•
MathChannel1 (MFD28/32 Gen2 only)
•
MathChannel2 (MFD28/32 Gen2 only)
•
MathChannel3 (MFD28/32 Gen2 only)
•
MathChannel4 (MFD28/32 Gen2 only)
•
MathChannel5 (MFD28/32 Gen2 only)
•
MathChannel6 (MFD28/32 Gen2 only)
•
MathChannel7 (MFD28/32 Gen2 only)
•
MathChannel8 (MFD28/32 Gen2 only)
•
Usertable1 (MFD28/32 Gen2 only)
•
Usertable2 (MFD28/32 Gen2 only)
•
Usertable3 (MFD28/32 Gen2 only)
•
Usertable4 (MFD28/32 Gen2 only)
•
Usertable5 (MFD28/32 Gen2 only)
•
Usertable6 (MFD28/32 Gen2 only)
•
Usertable7 (MFD28/32 Gen2 only)
•
Usertable8 (MFD28/32 Gen2 only)
The
fourth area
can be used to get a quick overview of the individual information about the
sensors
.
Simply select the desired information and compare it directly.
In the
fifth and last area
you have the possibility to activate the
enhanced mode
by a slider. In the
enhanced mode (
chapter 8.2.2) you also have the possibility to set the
min
and
max warning values
for each
sensor
in the
TRI Editor
. To do this, please click on the corresponding
sensor
to open the
popup for editing.
