Rev 1.0
4
1
Description and scope of delivery
Thank you for purchasing your
VADpro VAD15 / CANchecked
MFD15
Gen2. With the
VADpro
data
display, you can display live data from your vehicle while driving,
log sensors
and use many other
functions that are presented to you in this manual. In some cases, additional licenses are required
for the functions.
This guide applies not only to the
VADpro
VAD15
/
CANchecked
MFD15 Gen2, but also to MFA2.0
Gen2.
This guide explains how to operate and handle your Gen2 data display. In addition to the connection,
setup and navigation, this manual deals specifically with the individual setting of the data display, as
well as the connection and operation of our "online display setup software" (o
DSS
).
You received your data display with a vehicle-specific bracket or as a pure circular display. Always
included are:
•
the Quickstartguide
•
2 anti reflexfoils
•
CANchecked stickers
•
two Molex connectors (6 pin and 12 pin), a selection of different pre-crimped leads, pins for
self-crimping and two 1kohm resistors
Your display itself has an OLED display, an LED, a Wi-Fi hotspot, three Molex jacks on the back and a
MicroUSB port on the board. This is not accessible without dismantling the display and usually does
not have to be used by the user. Your data display will be delivered with a selection of
TRI files
pre-
installed in the file system.
Terms associated with the data display are shown in italics in this guide for better understanding.
