Rev 1.0
14
•
Assignment of buttons
o
left button
o
right button
o
turning knob
•
Appearance
o
Start picture
o
Start page
o
Wallpaper
o
Color
•
Warnings
o
Popup duration
o
Color of the warning LED
•
MPP1 Usage
o
Assignment of function to
MPP1
•
NTC correction
o
Corrects the NTC temperature reading. The lower the value the lower the red
temperature
–
default 210
•
Button to reset the display
o
Resets your data display to factory settings
6.1.3
Units
In this submenu you can set the desired units. In total, there are four different types of
sensors
available:
•
Pressure
–
bar or psi
•
Temperature
–
Celsius or Fahrenheit
•
Speed
–
km/h or mph
•
Combustion ratio
–
lambda or AFR
Figure 13: Units used
If you prefer to see your boost displayed in kpa instead of bar, you can change the multiplier under
Sensor Settings (see chapter 6.1.8). Furthermore, you can also directly change the name of your
sensors under Sensor Settings.
