Section 3 ‒ MLWebHardware Configuration
MLRemote User's Guide
19
Section 3 ‒ MLWebHardware Configuration
Data collected by the MLRemote
is transmitted to the MLBase
via 900Mhz (or optional 2.4Ghz) radio signal.
The MLBase in turn, sends the data to MLGateway over a wireless or wired network to be imported.
MLWebHardware is used to configure how the data is imported.
MLSuite
must be installed on the server prior to configuration. See the
MultiLogger Suite Installation Guide
for
details on installing MLSuite.
The steps for configuring the MLBase and MLRemote in MLWebHardware vary depending on the deployment. Each
of these variations are outlined in the following sections.
Note - This section outlines the process for configuring an MLBase with one or more MLRemotes on a single network.
▪
MLBase configuration
‒ See Section 3.1
▪
MLRemote configuration
– See Section 3.2
▪
MLRemote programming
‒ See Section 3.3
▪
Verifying and updating the program -
See Section 3.4
▪
Data collection configuration
- See Section 3.5
