Section 2 ‒ MLRemote Installation
16
MLRemote User's Guide
2.4 Sensor Installation
Numerous sensor types are supported, including vibrating wire, 4-20mA, and linear potentiometer.
The MLRemote module includes a single vibrating wire input, a thermistor input, and two analog measurement
inputs.
Models that include an MLMux4 allow up to 4 additional sensors to be connected.
Hint - Models including the MLMux4 are shipped already wired to connect additional Vibrating Wires sensors. If using the
MLMux4 to connect sensor types other than vibrating wires, this wiring must be reconfigured accordingly.
Connecting Sensors
Sensors are threaded through the multi-hole strain relief fitting at the bottom of the enclosure and wired to the
terminals of the MLRemote Module or the MLMux4 (if included).
