Section 2 ‒ MLRemote Installation
14
MLRemote User's Guide
General installation steps are as follows:
▪
Excavate to a minimum of 1.2m (4’), deeper if possible. Install the bucket, locate the pipe in the bucket and
fill with mixed concrete. Follow the directions on the bag for concrete mixing. Use a level to adjust the
position of the pipe before it sets. Use lumber or other suitable props to hold the pipe in position overnight.
See the manufacturer's instructions for the precise curing time.
▪
The MLRemote ships with the top plate in place. Unscrew the four screws located in the corners of the
enclosure and remove the top plate.
▪
With the top plate removed, attach the custom brackets to the enclosure. Be sure to install the U-bolt pipe
clamps on the brackets prior to attaching to the enclosure.
▪
Hold the enclosure against the pipe and affix the pipe clamp hardware to the pipe to secure the enclosure.
See the following sections for instructions on attaching the sensors and connecting power.
