Can-Am SPYDER F3TM 2016 Operator'S Manual Download Page 85

Page: 85 / 171

SAFETY INFORMATION ON THE VEHICLE

rmo2015-008-027_a

1. Label 5 located underneath front service

cover

Label 6

Clean filler cap before removing.

Use only DOT 4 brake fluid from

a sealed container.

WARNING

704903119

rmo2015-008-053_a

1. Label 6 is located under RH lateral service

cover

Label 7

Part detachment could result in a road
hazard. To avoid a potential road hazard,
always attach tether cord to the part that
covers this compartment.

WARNING

704905127

rmo2015-008-222_b

1. Label 7 is attached to tether cord, under

passenger seat

Label 8

special care to maintain its

appearance.

See operator’s guide

-PVD chrome wheel should

be washed with water and

a mild soap. Do not polish,

use acid based or abrasive

chrome cleaner on the

PVD chrome wheel.

-Do not clean windshield

with alkaline or acid

cleaner, gasoline or solvent

to avoid windshield

damage.

See operator's guide.

704904936A

NOTICE

-Matt finish paint needs

704904936

LOCATED UNDER STORAGE COVER

______

SAFE OPERATING INSTRUCTIONS

______

Summary of Contents for SPYDER F3TM 2016












































































































































































Search results

Summary of Contents for SPYDER F3TM 2016

Reviews:

Brands by name

Popular brands

Can-Am SPYDER F3TM 2016, Operator'S Manual

Search results

Summary of Contents for SPYDER F3TM 2016

Reviews:

Brands by name

Popular brands