manualshive.com logo in svg

Can-Am SPYDER F3TM 2016, Operator'S Manual

Share
Download
Can-Am SPYDER F3TM 2016 Operator'S Manual Download Page 81

SAFETY INFORMATION ON THE VEHICLE

This vehicle comes with a hang tag and
labels containing important safety in-
formation.

Any person who rides this vehicle
should read and understand this in-
formation on the vehicle before riding.

Hang Tag

704905082A

 WARNING

The Spyder roadster is a different type of vehicle -

The Spyder roadster is a different type of vehicle -

it requires special skills and knowledge.

it requires special skills and knowledge.

Learn how the Spyder roadster is different. 

Learn how the Spyder roadster is different. 

Read

ead 

the operator's guide  (in storage compartments or under-

neath seats) and watch the safety video.

Comple

omplete 

a training course (if available), 

practi

tice

, become 

proficient with the controls, and get a proper license.

Refer

er 

to the Safety Card before riding.

Always wear a helmet and riding gea

ear a helmet and riding gear.

With this type of vehicle, riders are exposed to more road risks 
than in a car. Even skilled operators can be struck by other 
vehicles or lose control. This vehicle will not protect you in a 
crash.

Handling

andling limits and 

 limits and road 

oad conditions

onditions

The Vehicle Stability System (VSS) cannot stop you from 
losing control, flipping over, or falling off if you exceed this 
vehicle’s limits. Know the limits for different road conditions.  
Do not ride on ice, snow, or off road. Avoid puddles and running 
water. This type of vehicle can hydroplane on water and slip on 
gravel, dirt and sand covered roads. If you must go through 
these road conditions, slow down.

This hangtag may only be removed by the customer.

704905082

______

SAFE OPERATING INSTRUCTIONS

______

79

Summary of Contents for SPYDER F3TM 2016












































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands