Can-Am Roadster RT-622 2010, Service Manual

Page: 34 / 52

Section 02 CHASSIS
Subsection 03 (BODY)
rmr2010-066-219
PIVOT
8. Remove 2 top retaining screws from the latch
plate to remove the center blank cover.
rmr2010-066-220
LATH PLATE
9. Remove the center blank cover.
rmr2010-066-227
CENTER BLANK COVER
10. Hold latch place in place while removing the
2 lower retaining screws as the plate is spring
loaded.
NOTICE
Holding plate prevents losing spring
and ball located behind.
11. Remove the spring and ball.
rmr2010-066-226_a
1. Spring
2. Ball
3. Barrel actuator cover
12. Remove the key barrel actuator cover.
13. Insert key in key barrel.
14. Turn key 1/2 turn until the retaining tab is
aligned with the notch.
NOTE: In case key is lost or lock mechanism is
broken, change the complete main control handle
assembly.
15. Insert a small screwdriver in the notch and
gently lift the key barrel retaining tab to allow
removal of barrel.
24
rmr2010-066