Can-Am OUTLANDER 6x6 T 2021 Series Operator'S Manual Download Page 89

Page: 89 / 212

I CONTROLS

1) Throttle Lever

The throttle lever is located on the RH
side of the handlebar. It can be posi-
tioned to be activated with the thumb
or finger.

The throttle lever controls the engine
speed.

To increase or maintain vehicle speed,
press the throttle lever.

To decrease vehicle speed, release the
throttle lever.

219001961-001_a

TYPICAL

1. Throttle lever
2. To accelerate
3. To decelerate

2) Brake Lever

The brake lever is located on the LH
side of the handlebar.

219001872-001_d

1. Brake lever

The brake lever function is to slow
down or stop the vehicle.

When the brake lever is compressed,
the front and rear brakes are applied.

219001872-001_b

Braking effect is proportional to the
force applied on the lever.

3) Brake Lock

The brake lock lever is located on the
LH side of the handlebar.

219001872-001_c

1. Brake lever
2. Lock lever

The brake lock function is to maintain
brakes to all wheels to prevent the ve-
hicle from moving when parked.

WARNING

Always use the brake lock

and

en-

gage the PARK position on the shift
lever when the vehicle is not in op-
eration.

To engage the brake lock proceed as
shown:

_______________

Summary of Contents for OUTLANDER 6x6 T 2021 Series





















































































































































































































Search results

Summary of Contents for OUTLANDER 6x6 T 2021 Series

Reviews:

Related manuals for OUTLANDER 6x6 T 2021 Series

Brands by name

Popular brands

Can-Am OUTLANDER 6x6 T 2021 Series, Operator'S Manual

Search results

Summary of Contents for OUTLANDER 6x6 T 2021 Series

Reviews:

Related manuals for OUTLANDER 6x6 T 2021 Series

Brands by name

Popular brands