Can-Am OUTLANDER 6x6 T 2021 Series, Operator'S Manual

Page: 50 / 212

IV RIDING THE VEHICLE
What to Do After the Engine is Started
ITEMS TO BE
INSPECTED
INSPECTION TO PERFORM
✔
Steering
Check if steering operates freely by completely turning it
from side to side
Shift lever Check operation of shift lever (P, R, N, H and L)
4WD/6WD selector Check operation of 4WD/6WD selector
Brakes
Drive forward slowly a few feet and apply brake lever
and brake pedal individually. The brakes must fully apply.
Lever and pedal must fully return when released
Engine stop switch Check that the engine stop switch is working properly
Ignition switch
Check if ignition switch is working properly by restarting
and stopping the engine
2) Riding Gear
Actual weather conditions should help you decide how to dress. Dress for the
coldest weather expected. Thermal underwear next to the skin also provides a
good insulation. It is important that the operator always wears the appropriate
protective riding gear and apparel, including an approved helmet, eye protection,
boots, gloves, a long sleeved shirt and pants. This type of clothing will provide
you protection from some of the minor hazards you may encounter en route. The
operator must never wear loose clothing such as a scarf that may get entangled in
the vehicle or on tree branches and shrubs. Depending on conditions, anti-fogging
goggles or sunglasses may be required. Different colored lenses available for
goggles or sunglasses help you distinguish terrain variations. Sunglasses should
only be worn during the daytime.
48
_______
A) SAFETY INFORMATION
_______