Can-Am OUTLANDER 6x6 T 2021 Series, Operator'S Manual

Page: 158 / 212

II MAINTENANCE PROCEDURES
TIGHTENING TORQUE
Wheel lug nut
80 N•m ± 5 N•m
(59 lbf•ft ± 4 lbf•ft)
NOTICE
Always use the recom-
mended wheel nuts according to the
type of wheel. Using a different nut
could cause damage to the rim or
studs.
vmo2008-001-002_a
TYPICAL — ALUMINUM WHEEL
1. Wheel lug nut (closed end type)
20) Steering
Steering Inspection
Tie-Rods
Visually inspect tie-rods.
The tie-rods must be replaced if
warpage or any other damage is de-
tected.
WARNING
The tie-rod must be replaced if
damaged.
Tie-Rod Ends
Place vehicle on a level surface.
Apply brake lock.
Lift vehicle.
Secure vehicle on jack stands.
Inspect inner and outer tie-rod boots
for cracks.
Push and pull the wheels from the front
or rear edge to feel the play.
The tie-rod ends must be replaced if
there is an abnormal play or a boot is
cracked.
WARNING
The tie-rod end must be replaced if
the boot is cracked or shows an ab-
normal play.
21) Suspension
Front Suspension Lubrication
Lubricate front stabilizer bar bushings
and suspension arms at grease fit-
tings.
vmr2012-040-012_a
FRONT SUSPENSION ARMS
1. Grease fittings
SUSPENSION GREASE
Scandinavia
SYNTHETIC
SUSPENSION
GREASE (EUR)
(P/N 779226)
All other
countries
SYNTHETIC
SUSPENSION
GREASE
(P/N 779163)
Rear Suspension Lubrication
Lubricate rear suspension arms, sta-
bilizer bar links and pivot bushing at
grease fittings.
156
______________