Can-Am OUTLANDER 6x6 T 2021 Series, Operator'S Manual

Page: 90 / 212

I CONTROLS
219001872-001_a
Step 1: Apply brakes
Step 2: Lock brakes
NOTE: The lock lever can be set to in
several positions.
NOTICE
Ensure when the brake
lock is applied that the vehicle stays
securely in place.
To unlock the brakes, simply squeeze
the brake lever. It should return to the
rest position.
WARNING
Make sure brake lock is released
before operating the vehicle. If
brake lock is left ON while riding,
it may cause damage to the brake
system and cause loss of braking
capacity and/or fire.
4) Brake Pedal
The brake pedal is located on the RH
side footrest.
NOTE: The brake will have also an ef-
fect on front wheels through the drive
train when 6WD is engaged.
vmo2012-012-015_a
1. Brake pedal
When released, the brake pedal should
return to its original position.
Braking effect is proportional to the
force applied on the pedal.
NOTE: As on other wheeled vehicles,
the vehicle weight is transferred to the
front wheels when braking. To obtain
greater stopping efficiency, the brake
system distributes more braking force
to the front wheels. This will affect
vehicle handling and steering control
when braking vigorously. Take it into
account when braking.
5) Ignition Switch (Key)
The ignition switch is located on the LH
side of the central panel below the han-
dlebar.
219001866-005_a
TYPICAL IGNITION SWITCH
1. OFF
2. ON with light
3. ON
88
______________