Camus Hydronics Valiant-FT II Series, Installation And Service Manual

Page: 31 / 64

27
Rotation Schedule Adjustment
Description Electrical Connection(s) Programming Instructions
•
Standard rotation
schedule is based on
equalizing run time on
a 1-hour schedule
•
To vary the rotation to
a fixed schedule
based on (hours,
days)
1) Press and
2) Press [Lead Lag Master Configuration]
3) Press [Advanced Settings >]
4) Press the to arrive at Algorithms
5) Select Lead selection method: Sequence order
6) Select Lag selection method: Sequence order
7) Select Lead rotation time: (user defined)
Base Load Rate Adjustment
Description Electrical Connection(s) Programming Instructions
•
Upon a call for heat
the lead boiler will fire
up to the specified
base load rate (80%).
If the temperature is
not within Error
threshold (5
o
F) of
setpoint after
Interstage delay (2
minutes) a lag boiler
will be brought online
and will also fire up to
the base load rate
specified.
•
Modulation of boilers
will only occur after all
boilers in the Lead
Lag system are firing
up to the specified
base load rate (80%).
1) Press and
2) Press [Lead Lag Master Configuration]
3) Press [Advanced Settings >]
4) Press the to arrive at Rate Allocation
5) Select Base load common: (user defined)
Adjust Staging of Boilers
Description Electrical Connection(s) Programming Instructions
•
Upon a call for heat
the lead boiler will
fire up to the
specified base load
rate (80%). If the
temperature is not
within Error threshold
(5
o
F) of setpoint after
Interstage delay (2
minutes) a lag boiler
will be brought online
and will also fire up
to the base load rate
specified.
•
This method will then
be repeated for the
next lag boiler, if
available.
1) Press and
2) Press [Lead Lag Master Configuration]
3) Press [Advanced Settings >]
4) Press the to arrive at Add Stage
5) Select Error threshold
6) Select Interstage delay