© CamRanger – Patent Pending
11
HDR
The “HDR”, or Advanced Bracketing, tab can be used to generate a series of photos with varying
exposures.
•
Advanced Bracketing is only enabled when the
camera is in Manual exposure mode.
•
The Property field specifies the camera property to
be varied. There are three options: Shutter Speed,
Aperture, and ISO.
•
The Initial Delay field specifies the amount of delay,
if any, to take before beginning the bracketing
sequence.
•
The initial value for the selected property is set with
the Start Value field.
•
The total number of images to capture is specified
by the Number of Shots field.
•
The possible Step Size values are up to 3 stops and
specify by how many stops to vary the exposure between each capture.
•
The valid values for the Number of Shots are automatically determined based on the values
specified for Start Value and Step Size. For example a step size of 1/3 stops will allow more
shots than a step size of 3 stops.
•
The starting point of the bracket is the mid-‐point. The resulting sequence will start at the
lowest exposure but with the initially set value as the mid-‐point.
•
After configuration, press the “Start” button to begin the bracketing process.
•
Note: the post processing is not done within the CamRanger application.
