www.camplux.com
1
33
Visit Us: Camplux.com
3330-A Marathon Ct Charleston, SC 29418
(844) 538-7475
Lighting The Water Heater
Before operating this water heater, be sure to read and follow the instructions on
the label pictured below and all other labels on the water heater, as well as the
warnings printed in this manual. Failure to do so can result in unsafe operation of
the water heater resulting in property damage, personal injury, or death.
Should you have any problems reading or following the instructions in this
manual. STOP! Get help from help from Camplux at www.camplux.com ,live chat
and toll free at (844)538-7475.
Operating The Water Heater
Turning on the water heater
1. Make sure the gas type you will use is same as the type on the data plate.
2. Turn on the main gas valve, plug in the power cord (be sure the socket is well
grounded), and press the “ON/OFF” button on the control panel. Set
temperature to 120°F(49°C).
3. Turn on the faucet, and the fan will begin working. You will hear the ignition
sound after a few seconds. The burner will ignite, and hot water will come out.
If the burner is not ignited successfully, the ignition sound will last a few
seconds. If the burner still fails to ignite, turn off the faucet and wait for 10-20
seconds, and repeat the above procedures.
For first use and/or if the water heater has not been used for a considerable
period of time, the repeat of the above procedures may be required, due to
accumulated air inside the gas pipe.
Water Flow
Flame Signal
Fan Signal
Temperature Indicator
Temperature Down
Power On/Off
Temperature Up
Shower Kits
NOTE:
Press and hold "Temperature Up" and "Temperature Down" button at the
same time for 3 seconds, you can switch the temperature from Fahrenheit to
Celsius. Or you can repeat to press and hold for 3 seconds if want to change back
to Fahrenheit.
