Campbell CCFC, Product Manual

Page: 19 / 144

3. Set the details of the media event:
a. Set the photo settings.
b. Set the video settings.
4. Set other details related to communications and I/O. These other parameters are described
in the following sections:
a. Network (p. 77).
b. Digital I/O (p. 100).
c. RS-232 communications (p. 109) and RS-485 communications (p. 111).
7. Factory setup
Table 7-1 (p. 13) outlines the CCFC factory settings that are relevant for initially communicating
with the camera.
Table 7-1: CCFC factory default configuration
Configuration setting Value
Power Mode Fully On State
Wi-Fi IP Address 10.0.0.1
Link Local IP 169.254.99.99
Ethernet Network IP Address Acquired automatically using DHCP
Serial I/O Port RS-232 or RS-485
RS-232 Baud Rate 115200
PakBus® Address 55
The following two methods are available for configuring the CCFC camera:
1. Using the web interface with a Wi-Fi or Ethernet connection
2. Using the RS-232 serial lines
Using the web interface is the best way to set up the camera. Communicate with the camera
using an Ethernet connection or Wi-Fi to facilitate focusing and targeting the camera when
installed.
CCFC Field Camera 13