![background image](http://html1.mh-extra.com/html/campbell/ccfc/ccfc_product-manual_489121115.webp)
FIGURE 14-54. History
15. RS-232 communications
The camera uses RS-232 serial communications for two purposes:
1. Configure and setup the camera using Campbell Scientific
Device Configuration Utility
software
2. Send photo files from the camera to other devices using the PakBus® protocol
This value is displayed on the web interface under Settings > File Transfer > PakBus®.
FIGURE 15-1. PakBus® settings
The CCFC Power I/O port configuration defaults to a 3-wire RS-232 connection (Tx, Rx, G), as well
as power. The wires connect directly to the control terminals of a compatible data logger. For
connection to a computer 9-pin serial port, use a DB9 female-to-terminal block adapter, which
CCFC Field Camera
109