RS-232 or RS-485
Maximum baud rate:
115200 bps
NOTE:
For RS-232: The maximum recommended cable length is 15 m (49 ft) when using the 115200
baud rate and 30 m (98 ft) when using the 57600 baud rate.
For RS-485: A user-supplied (twisted pair) cable spliced onto the communication wires can
extend the maximum cable length to 305 m (1000 ft). Keep the power wires to the 20 m (65
ft) factory length (or 0.7 Ohm user-supplied spliced cable) limit.
Camera memory
File type:
jpeg (photo); avi (video)
Size:
16 GB
Zoom:
18x optical zoom
6. Quick notes
6.1 CCFC general
l
When ordering the CCFC series, use the model numbers CCFC-RS232 (
(p. 111)).
l
The Setup Button Status LED (
(p. 15)) will flash when the camera is
in an Active Power state.
l
When the Status LED is steadily on, the camera is booting up. Avoid interrupting this
process.
l
Briefly pressing the Setup Button always causes the camera to exit from any low-powered
quiescent states and enables the Ethernet interface for communications. The camera will
remain in this state for 5 minutes.
l
An active session to the camera with a web browser prevents the camera from entering a
low-powered state.
l
Avoid removing power from the camera when it is in an active state. If the camera is in an
active state (Status LED is flashing), properly shutdown the camera to avoid any memory
corruption before removing power. The camera can be shut down by holding the Setup
CCFC Field Camera
10
