Electro-pneumatic Regulator ER100
Instruction Manual
rev. 2.0
page 25 / 38
Se la funzione
non è valida
Nel caso di valore
proporzionale
incrementato (H)
Nel caso di valore
proporzionale
decrementato (L)
Valore impostato
4.4. Setting
Method
•
Before changing the setting, unlock the key.
4.4.1.
Input Signal Setting
Press and hold the [SET] key at least for two seconds in the state of screen F1.
The “F1 setting mode” starts.
4.4.1.1.
Analog Type Input Signal Selection
Note: The analog input specification may not be changed.
In case of analog input selection
※
Factory setting
After the data is settled, the setting mode is canceled to
return to screen F1.
SET
For two seconds or longer
In case of preset memory input selection
Transition to preset memory input setting mode
(See section 4.4.1.3 “Preset Memory Input Setting.”)
SET
For two seconds or longer
In case of direct memory input selection
Transition to direct memory input setting mode
(See section 4.4.1.4 “Direct Memory Input Setting.”)
SET
For two seconds or longer
The input signal selection
setting mode is canceled to
return to screen F1.
SET
For two seconds or longer
!
CAUTION
:
