Electro-pneumatic Regulator ER100
Instruction Manual
rev. 2.0
page 2 / 38
Safety instructions
To use this product safely, basic knowledge of pneumatic equipment,
including materials, piping, electrical system and mechanism, is required
(ISO 4414 *1
JIS B 8370 *2).
We do not bear any responsibility for accidents caused by any person
without such knowledge or arising from improper operation.
This since this product is used in a vast range of applications and
therefore not possible for us to have full knowledge in all of them.
Depending on operating conditions, the product may fail to operate to
maximum performance, or cause an accident. Thus, before placing an
order, examine whether the product meets your application,
requirements, and how to properly use it.
This product incorporates many functions and mechanisms to ensure
safety. However, improper operation could result in an accident. To
prevent such accidents please
read this operation manual
carefully for proper operation.
Please observe the cautions on handling described in this manual, as
well as the following instructions:
Additionally, the caution is classified into the following three groups,
“CAUTION”, “WARNING”, and “DANGER”, in order to identify the degree
of the danger it presents and possible hazard.
Failure to pay attention to DANGER notices in extreme
conditions may cause a situation that results in serious
injury or loss of life.
Failure to pay attention to WARNING notices may
result in serious injury or loss of life.
Failure to pay attention to CAUTION notices may result
in injury or equipment damage.
*1) ISO 4414
: Pneumatic fluid power
•••
Recommendations for the application of
equipment to transmission and control systems.
*2) JIS B 8370
: General rule for pneumatic systems
DANGER:
!
WARNING:
!
CAUTION:
!
